Fire Alarm Smoke & CO Detector Tester

This smoke dispenser is of lightweight construction, with a flexible swing frame which makes it ideal for testing virtually all types of smoke detectors at heights up to 9m. The unit uses a Aerosol smoke or CO can (42/111 or 42/112); when activated by pushing the unit against the ceiling it sprays the smoke/co around the detector in a short controlled burst. The clear cup and diaphragm allows easy viewing of the detector LED whilst testing is under way.

Tester Head

Spare Aerosol Retaining Cup

Spare Silicone Membrane for Test Cup

Telescopic and Extension Poles

Telescopic Pole (4 Section)

The lightweight telescopic pole extends from 1.26m to 4.50m allowing the user to reach up 6m.

Main Features

• A recommended maximum of 3 extension poles can be added to allow the user to reach up to 9m.

• Accepts all devices.

• Simple and fast button and hole locking arrangement.

Extension Pole (Single Section)

Main Features

• 1.13m pole lengths, which can be used by themselves.

• Up to 3 separate extensions can be added to the Telescopic pole to allow the user to reach up to 9m.

• Simple and fast button and hole locking arrangement.

4.5m Telescopic Pole

2.5m Telescopic Pole

1.13m Extension Pole

Detector Removal Tool

Detectors fitted out of reach present particular problems for removal and replacement for service purposes. This device, fitted to the No Climb extension poles, solves the problem.

Main Features

• A universal detector removal tool suitable for use on an extensive range of detector makes and sizes.

• Colour-coded heads (tri-cams) rotate to give a wide range of aperture settings and lock into place to take different sized detectors.

• A universal joint keeps the tool parallel with the ceiling at all times, even if the ceiling is at an angle.

Consumables

Testing using aerosols dispensed from pressurised canisters is now widely accepted as the most popular means of achieving the test for function of a smoke detector.

One 250ml canister is sufficient to test a minimum of 45 smoke detectors

A clean synthetic smoke aerosol, this formulation has been developed after extensive research in order to deliver particles to replicate those found in a wide spectrum of real smoke.

Main Features

• Tests both ionisation and optical smoke detectors.

• Does not leave any residue when used correctly.

• Leaves no notable odour.

• Non - flammable and CFC free.

250ml Canister of Smoke

250ml Canister of CO2

250ml Air Duster

Fire Alarm Cordless Heat Detector Tester

Battery Powered Heat Detector Tester, suitable for testing Spot / Point Type, Rate of Rise, Fixed Temperature and Combination Detectors up to 90°C / 194°F. 1 hour fast charger operates from 110/120/220/240v AC or 12v DC car cigarette socket. Typically 50 tests of 30 seconds duration per Battery Baton, Limitless if using one Battery Baton whilst charging another. Colour coded LED user feedback.

Cordless Heat Detector Tester Kit

Head Only

Battery Batton

220/240v Mains Charger

Spare Silicone Membrane for Test Cup

Fire Alarm Mains Heat Detector Tester

110/120v or 220/240 AC Mains powered Heat Detector Tester, suitable for testing Spot / Point Type, Rate of Rise, Fixed Temperature and Combination Detectors up to 90°C / 194°F. Heating process is time controlled to prevent damage to the detector. Designed to be used with 4.5m/2.5m Fibreglass Telescopic Pole & 1.13m Fibreglass Extension Poles.

Heat Detector Tester 110/120v

Heat Detector Tester 220/240v

5m Additional Extension Cable Assembly