LS 112

The LS 112 is a mid-size X-ray security screening system with a low conveyor belt for convenient loading of larger items. The horizontal X-ray orientation allows items to be placed on the conveyor belt in a upright position to facilitate easy loading and unloading. With a tunnel opening of 650 mm (25.6") wide by 812 mm(32") high, the LS 112 is ideal for screening large pieces of checked luggage, boxes and crates. The system is ideally suited for use in air terminals, warehouses, customs facilities and any place where high security and complete screening of large items is required.

The advanced LS 112/V is a PC based system that incorporates our latest technology featuring an enhanced modular design. This system seamlessly incorporates advanced computer options including Threat Image Projection (TIP), Operator Assist (OA) and Image Archiving (IA).

As part of the Security and Detection Systems' family of products, the LS 112 shares in more than 25 years of experience in the manufacture of X-ray security products. With over 18,000 units in the field world-wide, and an extensive service organization to support them, L-3 Security and Detection Systems has established its reputation as the leading supplier of X-ray security products in the world.

Features

LS 112/III

• Dual 17" Color Monitors

• 483 mm (19") Entry/533 mm (21") Exit Conveyor

Standard Features:

• Variable Gamma

• Pseudo Color

• Zoom 2X and 4X

• Edge Trace

• High Penetration

• Reverse Monochrome

• E-scan Material Discrimination

• Organic Stripping

• Inorganic Stripping

Optional Features:

• 1.0 m & 2.0 m Entry Roller Tables

• 1.0 m Exit Roller Table

• 3 Ft Exit Baggage Slide

• Voltage stabilizer

• CE Compliance Kit

LS 112/V

• All Standard Features of the LS 112/III

• Advanced Options Computer

Advanced Options Available:

• Threat Image Projection (TIP)

• Operator Assist (OA)

• Image Archiving (IA)

General:

Tunnel Opening: 650 mm (25.6") W x 812 mm (32") H

Conveyor Belt height: 287 mm (11.3”)

Power Requirements: 115-120 VAC, 60 Hz (15 amp max), 230-240 VAC, 50 Hz (10 amp max)

Conveyor Speed: 0.23 m per sec (45 feet per min) @ 60 Hz, 0.18 m per sec (36 feet per min) @ 50 Hz

Conveyor Capacity: 136 kg (300 lb)

X-Ray:

Voltage: 160kVp constant potential tube

Duty Cycle: 100%

Cooling: Sealed oil bath

Beam Orientation: Horizontal

X-ray Sensor: 1216 E-Scan photo diodes in folded array (L-shaped) configuration

Dose per inspection: 0.1mR typical

Physical Specifications:

Weight (Uncrated): approx 871 kg (1916 lb)

Weight (Crated): approx 1094 kg (2406 lb)

Construction: Steel frame on casters

Environmental:

Operating Temperature: 0°C to 40°C

Storage Temperature: -20°C to 50°C

Humidity: 95% non-condensing

Airborne Noise Level: <70dB (A)

LS 112/III:

Resolution: 38 AWG guaranteed, 40 AWG typical

Penetration: 27 mm steel guaranteed, 29mm typical

Contrast Sensitivity: at least 22 levels visible using a step wedge

Video Display: two 17" SVGA high resolution, low radiation, ergonomic, flicker free displays

LS 112/V:

Resolution: 38 AWG guaranteed, 40 AWG typical

Penetration: 27 mm steel guaranteed, 29 mm typical

Contrast Sensitivity: at least 24 levels visible using a step wedge

Video Display: two 17" SVGA high resolution, low radiation, ergonomic, flicker free displays

Computer Specifications (Minimum):

Processor: Intel Pentium™ III

System Memory: 128 MB Ram

Display: 24 Bit-True Color (16.7 Million Colors)

Hard Disk: 9 GB High Speed SCSI Disk Storage

Additional Drive: Internal Zip™ Drive

Radiation Safety:

All Security and Detection Systems' X-ray systems are certified to be in full compliance with all radiation safety requirements and external emissions limits as specified in the United States Code of Federal Regulations, Title 21, Section 1020.40 (21CFR1020.40) that apply to our products. Typical leakage radiation is less than 0.1mR/hr compared to maximum of 0.5 mR/hr permitted by the Federal Standard.

Operational Standards:

Complies with all published International Standards including the U.S. Federal Aviation Administration Standards, "Use of X-Ray Systems" (Federal Standards 14 CFR 108.17 and 14 CFR 129.26).

Film Safety:

Guaranteed for high speed films up to ISO 1600.

Design Policy:

Security and Detection Systems reserves the right to change specifications in the course of continuous improvement. Specifications are provided for reference only and actual equipment may differ slightly from the description given. Typical dimensions are within +/- 5% of nominal values.