Safety Screening Systems

The LS 215 is an X-ray security screening system with a compact design, suitable for use where space is limited. With a tunnel opening of 610mm (24") wide by 468mm (18.44") high, the LS 215 is ideal for the screening of briefcases and packages. The system is ideally suited for embassies and mailrooms, government buildings, courtrooms, nuclear power stations, and commercial facilities requiring screening of small parcels. The LS 215 is also equally suitable for carry-on baggage at airports where floor space may be a consideration.

LS 215

Optional Features

• Standard with single monitor
• Variable gamma (color and B&W)
• High penetration
• Reverse monochrome
• Suspicious luggage alert
• Area threshold alert
• Pseudo color
• Automatic threat alert
• Zoom 2x and 4x
• Edge Tracing

• E-Scan® with dual monitors, Inorganic and Organic Stripping
• 3 or 4 color palette
• Automatic voltage stabilizer
• Remote diagnostics
• 17" monitors
• Threat Image Projection System (TIP)
• Remote console with monitor cabinet and control panel
• LS Training and Testing System
• Operator Assist®
• Image Archiving"!
• Conveyor extensions, loading tables, roller beds and baggage slides
• Custom cabinet color
• "Z" threat alert
• "CE Mark" Compliance Kit

LS 215/III -

Optional Features

• Entry/exit converyors .1, and 1.5 meters.
• Extended tunnel shields
• Entrance and exit tables
• Entrance and exit roller tables
• Voltage stabilizer
• CE compliance kit

LS 215/V -

Optional Features

• Threat Image Projection (TIP)
• Operator Assist (OA)
• Image Archiving (IA)

Resolution:

38 AWG guaranteed 40 AWG typical

Penetration:

27mm (1.1") steel guaranteed, 29mm (1.15") typical

Contrast Sensitivity:

At least 20 levels visible as measured by a step wedge

Dose per inspection:

Standard 0.05mR typical
E-Scan® 0.1mR typical

Tunnel Opening:

610mm (24.00") wide x 468mm (18.44") high

Conveyor Height:

638mm (25.12")

Power Requirements:

115-120 VAC, 60Hz (15 amp max)
230-240 VAC, 50Hz (10 amp max)

Conveyor Speed:

0.23m per sec (44 feet per min) @60Hz.
0.18m per sec (36 feet per min) @50Hz.

Conveyor Capacity:

68kg (150lbs.)

Airborne Noise Level:

<70dB (A)

X-Ray Source

Voltage:

160kVp constant potential tube operating @ 140kVp

Duty Cycle:

100%

Cooling:

Sealed oil bath

Beam Orientation:

Vertically Upward

X-Ray Sensor

576 (1152 E-Scan®) photo diodes in folded array (L-shaped) configuration.

Digital Memory

Digital Memory Unit (Standard)

1024 x 1024 x 8

E-Scan®:

1024 x 1024 x 16

Levels of gray:

256

Physical Specifications

Weight: Approx:

591kg (1350 lbs)

Weight (Crated):

718kg (1580 lbs)

Construction:

Uni-body Frame

Environmental

Operating Temperature:

+0°C (32° F) to 40°C (104° F)

Storage Temperature:

-40°C (-40° F) to 70°C (158° F)

Humidity:

95% non-condensing

Video Display

15" SVGA high resolution, low radiation, ergonomic, flicker free display. E-Scan®: additional 15" SVGA color display

Health & Safety

Complies with all published International Standards including the U.S. F.D.A., Center for Devices and Radiological Health Standards for Cabinet X-Ray Systems (Federal Standard 21-CFR 1020.40). Typical leakage radiation is less than 0.1 mR/hr. compared to maximum leakage of 0.5 mR/hr. permitted by the Federal Standard. Film Safety: Guaranteed for high speed films up to ISO 1600.

Operational Standards

Complies with all published International Standards including the U.S. Federal Aviation Administration Standards, "Use of X-Ray Systems" (Federal Standards 14 CFR 108.17 and 14 CFR 129.26).

Design Policy

Pricing and Specifications are subject to change without notice.