Miniscan

The Miniscan is a compact X-ray inspection system designed for mail, packages and small parcels. The Miniscan is useful for the detection of mail bombs, explosive devices, weapons, contraband and other potentially dangerous items. With an inspection chamber of 10" (254 mm) high, 21" (533 mm) wide and 14" (355 mm) deep it can handle a wide variety items. The system may also be used in non-destructive inspection applications to confirm the quality or contents of manufactured items requiring limited imaging resolution.

Items requiring inspection are simply placed in the inspection chamber, the X-ray system is activated using a simple push button and the contents may be viewed through the viewing eyepiece. Up to 300 items per hour can easily be scanned.

The standard system is suitable for desktop use or may be optionally equipped with a cart to provide a suitable operating position and facilitate movement.

General:

Resolution: 36 gauge wire

Tube Current: 3mA

Viewing Mode: Direct image through eyepiece

Tunnel Opening: 610 m (24") W x 508 mm (20") H

Power Requirements: 110-120 VAC, 60 Hz (10 amp max), 220-240 VAC, 50 Hz (5 amp max)

X-Ray:

Voltage: 80kVp

Cooling: Sealed oil bath

Beam Orientation: Vertically Downward

Physical Specifications:

Weight (Uncrated): 173 kg (380 lb)

Weight (Crated): 204 kg (448 Ib)

Environmental:

Operating Temperature: 0°C to 40°C

Storage Temperature: -20°C to 70°C

Humidity: 95% non-condensing

Airborne Noise Level: <70dB (A)

Radiation Safety:

All Security and Detection Systems X-ray systems are certified to be in full compliance with all radiation safety requirements and external emission limits as specified in the United States Code of Federal Regulations, Title 21, Section 1020.40 (21CFR1020.40) that apply to our products. Typical leakage radiation is less than 0.1 mR/hr. compared to maximum of 0.5 mR/hr. permitted by the Federal Standard.

Complies with published International Standards including the U.S. Federal Aviation Administration Standards, "Use of X-Ray Systems" (Federal Standards 14 CFR 108.17 and 14 CFR 129.26).

Guaranteed for high speed films up to ISO 1600.

Security and Detection Systems reserves the right to change specifications in the course of continuous improvement. Specifications are provided for reference only and actual equipment may differ slightly from the description given. Typical dimensions are within +/- 5% of nominal values.